How to use rubber extruder?
Time:
Oct 26,2023
Source:
Author:
Due to the inconvenience of opening the rubber extruder, the degree of wear of the threaded elements and bushings in the barrel can be found at any time, so that effective maintenance or replacement can be carried out, so that it will not be found when there is a problem with the extruded product, causing unnecessary waste. During equipment maintenance, an ordinary twin-screw extruder usually must first remove the heating and cooling system, and then remove the screw as a whole. There is no need to use a partial twin screw. Just loosen a few bolts, and then turn the worm gear box handle device to lift the upper part of the barrel to open the entire barrel, and then perform maintenance. This not only shortens maintenance time, but also reduces labor intensity.
After using the rubber extruder for half a year, a comprehensive inspection should be carried out to check the tightness of all screws. If there is a sudden power failure during the production process, the main drive and heating device will stop. After the power is restored, each part of the barrel must be reheated to the specified temperature and held for a period of time before starting the extruder.
It is strictly forbidden to extend your fingers to the feed port when opening the rubber extruder, and use auxiliary tools when feeding. Do not remove or damage the warning signs installed on the machine. Excessive fatigue, alcohol consumption or taking drugs that affect the central nervous system are prohibited. At work, you must be attentive and not look around, whisper to each other, chat with others or make jokes. Please wear work clothes and safety protection equipment before work. No unit or individual may dismantle or change any safety protection device without the permission of the security department. If two or more people are required to complete special tasks together, they should be under unified command and pay attention to mutual coordination.
Real-time information
—
2021-11-12
Kaifeng Tianlang Rubber & Plastic Equipment Co., Ltd.
Sales Office: No.22, Longhai 3rd Road, Longting District, Kaifeng City, Henan Province
Factory address: No.22, Longhai 3rd Road, Longting District, Kaifeng City, Henan Province
Pre-Sales Phone:+86-13901079344 +86-19137966730
After-sales telephone:+86-18237874829
Mailbox:Tianlang@bj-tianlang.com
Mobile website
Copyright © Kaifeng Tianlang Rubber & Plastic Equipment Co., Ltd. Powered by www.300.cn Supports IPV6 SEO Business License
Copyright © Kaifeng Tianlang Rubber & Plastic Equipment Co., Ltd.
Powered by www.300.cn Supports IPV6